3.3.4
Security
In this section, you can configure 802.1x and MAC address table.
802.1X/Radius Configuration
802.1x is an IEEE authentication specification which prevents the client from connecting to a wireless
access point or wired switch until it provides authority, like the user name and password that are verified
by an authentication server (such as RADIUS server).
802.1X/Radius - System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters of this function.
• IEEE 802.1x Protocol: Enable or disable 802.1x protocol.
• Radius Server IP: Assign the RADIUS Server IP address.
• Server Port: Set the UDP destination port for authentication requests to the specified RADIUS Server.
• Accounting Port: Set the UDP destination port for accounting requests to the specified RADIUS
Server.
• Shared Key: Set an encryption key for using during authentication sessions with the specified
RADIUS server. This key must match the encryption key used on the RADIUS Server.
• NAS, Identifier: Set the identifier for the RADIUS client.
• Click Apply .
EKI-7556MI_Manual
Figure 3.3-43
802.1x/Radius System Configuration
92