SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings which allow you to synchronize
switch clocks on the Internet.
• SNTP Client: Enable/disable SNTP function to get the time from the SNTP server.
• Daylight Saving Time: Enable/disable daylight saving time function. When daylight saving time is
enabled, you need to configure the daylight saving time period.
• UTC Timezone: Set the switch location time zone. The following table lists the different location time
zone for your reference.
Table 3.18: UTC Timezone
Local Time Zone
November Time Zone
Oscar Time Zone
ADT - Atlantic Daylight
AST - Atlantic Standard
EDT - Eastern Daylight
EST - Eastern Standard
CDT - Central Daylight
CST - Central Standard
MDT - Mountain Daylight
MST - Mountain Standard
PDT - Pacific Daylight
PST - Pacific Standard
ADT - Alaskan Daylight
ALA - Alaskan Standard
HAW - Hawaiian Standard
Nome, Alaska
CET - Central European
FWT - French Winter
MET - Middle European
MEWT - Middle European Winter
SWT - Swedish Winter
EET - Eastern European, USSR Zone 1 +2 hours
BT - Baghdad, USSR Zone 2
ZP4 - USSR Zone 3
Conversion from UTC
- 1 hour
-2 hours
-3 hours
-4 hours
-5 hours
-6 hours
-7 hours
-8 hours
-9 hours
-10 hours
-11 hours
+1 hour
+3 hours
+4 hours
61
Time at 12:00 UTC
11am
10 am
9 am
8 am
7 am
6 am
5 am
4 am
3 am
2 am
1 am
1 pm
2 pm
3 pm
4 pm
Chapter3