IP Security
IP security function allows the user to assign 10 specific IP addresses that have permission to access the
switch through the web browser for the securing switch management.
• IP Security Mode: When this option is in Enable mode, the Enable HTTP Server and Enable Telnet
Server checkboxes will then be available.
• Enable HTTP Server: When this checkbox is ticked, the IP addresses among Security IP1 ~ IP10 will
be allowed to access this switch via HTTP service.
• Enable Telnet Server: When this checkbox is ticked, the IP addresses among Security IP1 ~ IP10 will
be allowed to access this switch via telnet service.
• Security IP 1 ~ 10: The system allows the user to assign up to 10 specific IP addresses for access
security. Only these 10 IP addresses can access and manage the switch through the HTTP/Telnet
service.
• And then, click Apply to apply the configuration.
Note
Remember to execute the "Save Configuration" action, otherwise the new
configuration will lose when switch powers off.
Figure 3.3-17
IP Security
63
Chapter3