Commands Set; Commands Level; Commands Set List; Table 3.2: Commands Set List - Advantech EKI-7556MI User Manual

3.2 Commands Set

The following table lists the CLI commands and description.
3.2.1

Commands Level

Table 3.1: Command Level
Modes Access Method
Begin a session with
your switch.
User EXEC
Enter the enable
command while in
Privileged user EXEC mode.
EXEC
Enter the configure
Global command while in
Configuration privileged EXEC
mode.
Enter the vlan
database command
VLAN database
while in privileged
EXEC mode.
Enter the interface
command with a
specific interface
Interface
while in the Global
configuration
Configuration mode
3.2.2

Commands Set List

EKI-7556MI_Manual
Prompt
switch>
switch#
switch(config)#
switch(vlan)#
switch(config-if)#

Table 3.2: Commands Set List

Command
User EXEC
Privileged EXEC
Global configuration
VLAN database
Interface configuration
34
Exit Method About This Model
Enter logout or quit. The user commands available
at the user level are a subset
of those available at the
privileged level.
Use this mode to
• Perform basic tests.
• Display system information.
Enter disable to exit. The privileged commands are
the advanced mode. Use this
mode to
• Display advanced function
status
• Save configuration
To exit to the Use this mode to configure the
Privileged EXEC parameters to be applied to
mode, enter exit or your switch
end
To return to the User Use this mode to configure
EXEC mode, enter VLAN-specific parameters.
exit.
To return to the Use this mode to configure the
previous mode, enter parameters for the switch and
exit or end. Ethernet ports.
Code Word
E
P
G
V
I