Start; Configuration; Configuration Over Web Browser; Entering The Ip Address Of The Router - Advantech SmartMotion ST355 User Manual

6.2 Start

The router is put into operation when the power supply is connected to this router. By
default, the router will automatically start to log on to the default APN. DHCP server will start
to assign addresses for devices on the Ethernet port ETH0. Router's behavior can be changed
via the web interface. This is described in detail in the Configuration manual for SmartMotion
routers.

6.3 Configuration

If no SIM card is inserted in the router, it is not possible to operate. Inserted SIM card
must have activated data transmission.

6.3.1 Configuration over web browser

For status monitoring, configuration and administration of the router is available a web
interface which can be accessed by entering the IP address of the router into the web browser.
The default IP address of the router is 192.168.1.1. Attention, it is necessary to use HTTPS
protocol for secure communication over a network!
Figure 27: Entering the IP address of the router
Configuration may be performed only by the user "root". The default password is printed
1
on the router's label. Change the default password as soon as possible!
1
If the router's label does not contain a unique password, use the password "root".
Figure 28: Entering login information
30
SmartMotion ST355