Trunk Commands Set; Table 3.5: Trunk Commands Set; Vlan Commands Set; Table 3.6: Vlan Commands Set - Advantech EKI-7556MI User Manual

show interface configuration
show interface status
show interface accounting
no accounting
3.2.5

Trunk Commands Set

Table 3.5: Trunk Commands Set

Commands
aggregator priority
[1~65535]
aggregator activityport
[Group ID]
[Port Numbers]
aggregator group
[GroupID] [Port-list]
lacp
workp
[Workport]
aggregator group
[GroupID] [Port-list]
nolacp
show aggregator
no aggregator lacp
[GroupID]
no aggregator group
[GroupID]
3.2.6

VLAN Commands Set

Table 3.6: VLAN Commands Set

Commands
vlan database
Vlanmode
form of this command to disable
the port.
show interface configuration status
I
show interface actual status
I
show interface statistic counter
I
Clear interface accounting
I information
Level Description
Set port group system priority
G
Set activity port
G
Assign a trunk group with LACP
active.
[GroupID] :1~3
[Port-list]:Member port list, This
parameter could be a port
range(ex.1-4) or a port list separate
G
by a comma(ex.2, 3, 6)
[Workport]: The amount of work
ports, this value could not be less
than zero or be large than the
amount of member ports.
Assign a static trunk group.
[GroupID] :1~3
[Port-list]:Member port list, This
parameter could be a port
G
range(ex.1-4) or a port list separate
by a comma(ex.2, 3, 6)
Show the information of trunk group
P
Disable the LACP function of trunk
group
G
Remove a trunk group
G
Level Description
Enter VLAN configure mode
P
To set switch VLAN mode.
V
37
switch(config)#interface fastEthernet 2
switch(config-if)#show interface configuration
switch(config)#interface fastEthernet 2
switch(config-if)#show interface status
switch(config)#interface fastEthernet 2
switch(config-if)#show interface accounting
switch(config)#interface fastEthernet 2
switch(config-if)#no accounting
Example
switch(config)#aggregator priority 22
switch(config)#aggregator activityport 2
switch(config)#aggregator group 1 1-4 lacp workp
2
or
switch(config)#aggregator group 2 1,4,3 lacp
workp 3
switch(config)#aggregator group 1 2-4 nolacp
or
switch(config)#aggregator group 1 3,1,2 nolacp
switch#show aggregator 1
or
switch#show aggregator 2
or
switch#show aggregator 3
switch(config)#no aggreator lacp 1
switch(config)#no aggreator group 2
Example
switch#vlan database
switch(vlan)#vlanmode portbase
Chapter3