Din Rail Mounting - Advantech ICR-2437 Hardware Manual

Industrial cellular router

Hide thumbs Also See for ICR-2437:

Table of Contents

1. Product Overview

1.10 DIN Rail Mounting

The DIN rail clip is not supplied with the router as standard accessories, but it can be ordered by the order

code BB-DIN-ICR32.

The DIN rail clip is suitable for a DIN rail according to EN 60715 standard only. The default position of

the clip is shown in Figure ??.

When mounting the DIN rail clip, tighten the screws with max. torque of 0.4 Nm.

To remove the router from the DIN rail it is necessary to lightly push down the router so that the bottom

part of the DIN rail clip hitched to the DIN rail get out of this rail and then fold out the bottom part of the

router away from the DIN rail, see Figure ??.

ICR-2437 Hardware Manual

Figure 10: Position of the DIN Rail Clip

Figure 11: Removing Router from the DIN Rail

1.10 DIN Rail Mounting

Table of Contents