Din Rail Mounting - Advantech ICR-4434 Hardware Manual

Lte advanced industrial router

Hide thumbs Also See for ICR-4434:

Table of Contents

1. Product Overview

1.10 DIN Rail Mounting

The DIN rail clips are not included as standard accessories with the router. However, they can be ordered

using the order code BB-DIN-ICR32 (two pieces for one router).

You can attach two DIN rail clips to the router for mounting it onto a DIN rail that complies with the 60715

standards. The default position of the clips is depicted in Figure 10. If necessary, the clips can also be

rotated vertically.

When attaching the clips, tighten the screws with a maximum torque of 0.4 Nm.

To remove the router from the DIN rail, lightly push down on the router to disengage the bottom part of the

DIN rail clip from the rail. Then, pivot the bottom part of the router away from the DIN rail, as demonstrated

in Figure 11.

ICR-4434 Hardware Manual

Figure 10: Default Position of the DIN Rail Clips

Figure 11: Removing Router from the DIN Rail

1.10 DIN Rail Mounting

Table of Contents