Garmin Beil 407GX Cockpit Reference Manual page 94

Additional Features
10) Press the ENT Key. System registration is complete when 'REGISTERED' is
displayed in the STATUS field.
11) Enter the last four digits of the System ID number in the Access Code field.
12) Press the ENT Key. REGISTER will now be highlighted.
13) Press the ENT Key. System registration is complete when 'REGISTERED' is
displayed in the STATUS field.
Disable/Enable Iridium Transceiver
Iridium telephone and data communications may be turned on or off by performing
these simple steps.
Disabling/enabling telephone and low speed data services:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select REPORTS/DATA LINK.
3) If necessary, select the REPORTS Softkey. The AUX-REPORT STATUS Page is
now displayed.
4) Press the MENU Key. The Page Menu window is now displayed.
5) Turn the FMS Knob to select 'Disable Iridium Transmission' in the menu list.
6) Press the ENT Key. The Iridium transceiver is now disabled.
7) To enable the Iridium transceiver, repeat steps 1 through 4, then select
'Enable Iridium Transceiver'.
Telephone Communication
The pilot or copilot can place and answer calls on the Iridium satellite network.
Control and monitoring of telephone functions are accomplished through the AUX-
TELEPHONE Page.
To view the Telephone Page:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select the AUX-TELEPHONE Page.
78
Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
190-01254-00 Rev. B