Garmin Beil 407GX Cockpit Reference Manual page 134

Annunciations & Alerts
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message
DB CHANGE – Database changed.
Verify user modified procedures.
DB CHANGE – Database changed.
Verify stored airways.
FPL TRUNC – Flight plan has been
truncated.
LOCKED FPL – Cannot navigate
locked flight plan.
WPT ARRIVAL – Arriving at waypoint
-[xxxx]
STEEP TURN – Steep turn ahead.
INSIDE ARSPC – Inside airspace.
ARSPC AHEAD – Airspace ahead less
than 10 minutes.
ARSPC NEAR – Airspace near and
ahead.
ARSPC NEAR – Airspace near – less
than 2 nm.
APR INACTV – Approach is not
active.
118
Garmin G1000H
Comments
This occurs when a stored flight plan contains
procedures that have been manually edited. This
alert is issued only after an navigation database
update. Verify that the user-modified procedures
in stored flight plans are correct and up to date.
This occurs when a stored flight plan contains
an airway that is no longer consistent with the
navigation database. This alert is issued only
after an navigation database update. Verify
use of airways in stored flight plans and reload
airways as needed.
This occurs when a newly installed navigation
database eliminates an obsolete approach or
arrival used by a stored flight plan. The obsolete
procedure is removed from the flight plan. Update
flight plan with current arrival or approach.
This occurs when the pilot attempts to activate a
stored flight plan that contains locked waypoint.
Remove locked waypoint from flight plan.
Update flight plan with current waypoint.
Arriving at waypoint [xxxx], where [xxxx] is the
waypoint name.
A steep turn is 15 seconds ahead. Prepare to turn.
The aircraft is inside the airspace.
Special use airspace is ahead of aircraft. The
aircraft will penetrate the airspace within 10
minutes.
Special use airspace is near and ahead of the
aircraft position.
Special use airspace is within 2 nm of the aircraft
position.
The system notifies the pilot that the loaded approach
is not active. Activate approach when required.
Cockpit Reference Guide for the Bell 407GX
™
190-01254-00 Rev. B