Garmin Beil 407GX Cockpit Reference Manual page 136

Annunciations & Alerts
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message
FAILED PATH – A data path has failed.
MAG VAR WARN – Large magnetic
variance. Verify all course angles.
SVS – SVS DISABLED: Out of available
terrain region.
SVS – SVS DISABLED: Terrain DB
resolution too low.
SCHEDULER [#] – <message>.
CHECK CRS – Database course for
LOC1 / [LOC ID] is [CRS]°.
CHECK CRS – Database course for
LOC2 / [LOC ID] is [CRS]°.
[PFD1 or MFD1] CARD 1 REM –
Card 1 was removed. Reinsert card.
[PFD1 or MFD1] CARD 2 REM –
Card 2 was removed. Reinsert card.
[PFD1 or MFD1] CARD 1 ERR –
Card 1 is invalid.
[PFD1 or MFD1] CARD 2 ERR –
Card 2 is invalid.
HDG PRESET MODE – Magnetic
anomoly detected. HPM is available.
USER MAG VAR – User magnetic
variation is active.
120
Garmin G1000H
Comments
A data path connected to the GDU, or the GIA
63H has failed.
The GDU's internal model cannot determine the
exact magnetic variance for geographic locations
near the magnetic poles. Displayed magnetic
course angles may differ from the actual
magnetic heading by more than 2°.
Synthetic Vision is disabled because the aircraft is
not within the boundaries of the installed terrain
database.
Synthetic Vision is disabled because a terrain
database of sufficient resolution (9 arc-second or
better) is not currently installed.
Message criteria entered by the user.
Selected course for LOC1 differs from published
localizer course by more than 10 degrees.
Selected course for LOC2 differs from published
localizer course by more than 10 degrees.
The SD card was removed from the top card slot of
the PFD or MFD. The SD card needs to be reinserted.
The SD card was removed from the bottom card
slot of the PFD or MFD. The SD card needs to be
reinserted.
The SD card in the top card slot of the PFD or
MFD contains invalid data.
The SD card in the bottom card slot of the PFD or
MFD contains invalid data.
The magnetometer has detected a magnetic
anomoly that could affect heading indications.
Heading Preset Mode may be used.
User magnetic variation mode was selected
during previous operation and is still active
(checked at power-up.)
Cockpit Reference Guide for the Bell 407GX
™
190-01254-00 Rev. B