Mfd & Pfd Message Advisories - Garmin Beil 407GX Cockpit Reference Manual

Voice Alert
"High", "Low", "Same
Altitude" (if within 200
feet of own altitude), or
"Altitude not available"
"Less than one mile",
"One Mile" through
"Ten Miles", or "More
than ten miles"
MFD & PFD MESSAGE ADVISORIES
Message
DATA LOST – Pilot stored data was
lost. Recheck settings.
XTALK ERROR – A flight display
crosstalk error has occurred.
PFD1 SERVICE – PFD1 needs
service. Return unit for repair.
MFD1 SERVICE – MFD1 needs
service. Return unit for repair.
MANIFEST – PFD1 software
mismatch, communication halted.
MANIFEST – MFD1 software
mismatch, communication halted.
PFD1 CONFIG – PFD1 config error.
Config service req'd.
MFD1 CONFIG – MFD1 config
error. Config service req'd.
SW MISMATCH – GDU software
version mismatch. Xtalk is off.
190-01254-00 Rev. B
Intruder relative altitude (GTS 800 only)
Intruder distance (GTS 800 only)
Comments
The pilot profile data was lost. System reverts
to default pilot profile and settings. The pilot
may reconfigure the MFD & PFDs with preferred
settings, if desired.
The MFD and PFD are not communicating with
each other. The system should be serviced.
The PFD and/or MFD self-test has detected a
problem. The system should be serviced.
The PFD and/or MFD has incorrect software
installed. The system should be serviced.
The PFD configuration settings do not match
backup configuration memory. The system should
be serviced.
The MFD configuration settings do not match
backup configuration memory. The system should
be serviced.
The MFD and PFD have different software versions
installed. The system should be serviced.
Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
Annunciations & Alerts
Description
107