Nav/Com Tuning - Garmin Beil 407GX Cockpit Reference Manual

Standby
Fields
Tuning Box
See the Flight Instruments Section for selecting the DME (optional) and Bearing
Information windows and using VOR as the source for the bearing pointer.
NAV radios are selected for listening by pressing the corresponding keys on the
Audio Panel. Pressing the NAV1,or NAV2 Key selects and deselects the navigation
radio source. Selected audio can be heard over the headset and the speaker (if selected).
All radios can be selected individually or simultaneously.

NAV/COM TUNING

1) Press the small tuning knob to select the desired radio for tuning. A light
blue box highlights the radio frequency to be tuned.
2) Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3) Press the Frequency Transfer Key to place the frequency into the active
frequency field.
190-01254-00 Rev. B
Active
Fields
The NAV Radio is Selected
by Pressing the CDI
Softkey
Selecting a NAV Radio for Navigation
Selecting a NAV Radio Receiver
Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
Nav/Com/XPDR/Audio Panel
13