Outgoing Calls - Garmin Beil 407GX Cockpit Reference Manual

Outgoing Calls

Voice calls can be made from the cockpit through the Iridium Satellite Network.
To make a call from the cockpit using the Iridium satellite network:
1) Press the TEL Key on the audio panel.
2) Select the DIAL Softkey on the MFD.
3) Enter the desired telephone number (country code first) by selecting the
number softkeys on the MFD.
4) Press the ENT Key. 'OK' is highlighted.
5) Press the ENT Key. The system will begin calling the number.
When the phone is answered, the connection is established. To exit the call, select
the HANGUP Softkey.
Placing The Call on Hold
Select the HOLD Softkey on the MFD.
Or:
1) Press the MENU Key to display the Page Menu.
2) Turn either FMS Knob to place the cursor on 'Put Current Call On Hold'.
3) Press the ENT Key.
The phone is now isolated from the call. Select the HOLD Softkey again to resume
the call.
Text Messaging (SMS)
Messages may be sent to an email address or text message capable cellular telephone.
Message length is limited to 160 characters, including the email address.
The text messaging user interface is mainly through the AUX-TEXT MESSAGING
Page.
Viewing the Text Messaging Page
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select SATELLITE PHONE.
3) If necessary, press the SMS Softkey to display the AUX-TEXT MESSAGING
Page.
190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
Additional Features
81