GDC 74H MESSAGE ADVISORIES
Message
MANIFEST – GDC1 software
mismatch, communication halted.
GTS 800 MESSAGE ADVISORIES
Message
GTS CONFIG – GTS config error.
Config service req'd.
MANIFEST – GTS software
mismatch, communication halted.
MISCELLANEOUS MESSAGE ADVISORIES
Message
FPL WPT LOCK – Flight plan
waypoint is locked.
FPL WPT MOVE – Flight plan
waypoint moved.
TIMER EXPIRD – Timer has expired.
190-01254-00 Rev. B
Comments
The GDC 74H has incorrect software installed.
The G1000H system should be serviced.
Comments
The GTS and GDU have incompatible
configurations. This alert is also set when the GTS
has an invalid mode S address configured or the
mode S address does not match both XPDR mode
S addresses.
The GTS has incorrect software installed. The
G1000H system should be serviced.
Comments
Upon power-up, the system detects that a stored
flight plan waypoint is locked. This occurs when
an navigation database update eliminates an
obsolete waypoint. The flight plan cannot find
the specified waypoint and flags this message.
This can also occur with user waypoints in a flight
plan that is deleted.
Remove the waypoint from the flight plan if it no
longer exists in any database,
Or
update the waypoint name/identifier to reflect
the new information.
The system has detected that a waypoint coordinate
has changed due to a new navigation database
update. Verify that stored flight plans contain
correct waypoint locations.
The system notifies the pilot that the timer has
expired.
Garmin G1000H
Cockpit Reference Guide for the Bell 407GX
™
Annunciations & Alerts
117