Garmin Beil 407GX Cockpit Reference Manual page 101

Send a Predefined Text Message
1) While viewing the AUX-TEXT MESSAGING Page, press the NEW Softkey.
2) The TEXT MESSAGE DRAFT Window is now displayed with the cursor in the
'TO' field. Enter the desired telephone number or email address. Entry can
be accomplished through the FMS Knob and softkeys on the MFD. The
FMS Knob is used to enter letters and numbers, or numbers can be entered
from the MFD by pressing the NUMBERS Softkey. Press the CAP LOCK
Softkey to create upper and lower case alpha characters. Special characters
can be accessed by pressing the SYMBOLS Softkey.
3) Press the ENT Key. The cursor is now displayed in the 'MESSAGE' field.
4) Press the PREDEFD Softkey. The PREDEFINED MESSAGE MENU Window is
displayed.
6) Press the ENT Key. The predefined message text is inserted into the
message field. If desired, the message can be edited by using the FMS
Knobs.
7) Press the ENT Key.
8) Press the SEND Softkey to transmit the message.
Text Message Boxes
Received text messages reside in the Inbox as 'Read' or 'Unread' messages. The
Outbox contains 'Sent" and 'Unsent' text messages. Saved messages that are meant to
be sent later are stored as Drafts. Each text message box may be viewed separately, or
together in any combination.
Show Inbox Messages
While viewing the AUX-TEXT MESSAGING Page, press the ARRANGE
Softkey, then press the INBOX Softkey.
Or:
a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on 'Show Inbox Messages'.
c) Press the ENT Key. The message box selected for viewing is indicated
at the bottom left of the list window.
190-01254-00 Rev. B Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
Additional Features
85