Garmin Beil 407GX Cockpit Reference Manual page 128

Annunciations & Alerts
GIA 63H MESSAGE ADVISORIES (CONT.)
Message
HW MISMATCH – GIA hardware
mismatch. GIA1 communication
halted.
HW MISMATCH – GIA hardware
mismatch. GIA2 communication
halted.
MANIFEST – GIA1 software
mismatch, communication halted.
MANIFEST – GIA2 software
mismatch, communication halted.
MANIFEST – GFC software
mismatch, communication halted.
MANIFEST – COM1 software
mismatch, communication halted.
MANIFEST – COM2 software
mismatch, communication halted.
MANIFEST – NAV1 software
mismatch, communication halted.
MANIFEST – NAV2 software
mismatch, communication halted.
COM1 CONFIG – COM1 config
error. Config service req'd.
COM2 CONFIG – COM2 config error.
Config service req'd.
COM1 TEMP – COM1 over temp.
Reducing transmitter power.
COM2 TEMP – COM2 over temp.
Reducing transmitter power.
COM1 SERVICE – COM1 needs
service. Return unit for repair.
COM2 SERVICE – COM2 needs
service. Return unit for repair.
112
Garmin G1000H
Comments
A GIA mismatch has been detected, where only
one is SBAS capable.
The GIA1 and/or GIA 2 has incorrect software
installed. The system should be serviced.
Incorrect servo software is installed, or gain
settings are incorrect.
COM1 and/or COM2 software mismatch. The
G1000 system should be serviced.
NAV1 and/or NAV2 software mismatch. The
G1000 system should be serviced.
COM1 and/or COM2 configuration settings do not
match backup configuration memory. The G1000
system should be serviced.
The system has detected an over temperature
condition in COM1 and/or COM2. The transmitter
is operating at reduced power. If the problem
persists, the system should be serviced.
The system has detected a failure in COM1 and/or
COM2. COM1 and/or COM2 may still be usable.
The system should be serviced when possible.
Cockpit Reference Guide for the Bell 407GX
™
190-01254-00 Rev. B