Garmin Beil 407GX Cockpit Reference Manual page 88

Hazard Avoidance
Muting/Unmuting Caution Alerts:
1) Turn the large FMS Knob to select the HTAWS Page on the MFD.
2) Press the MUTE CTN Softkey.
Or:
1) Press the MENU Key.
2) Select 'Mute Active Caution' or 'Unmute Active Caution' (choice dependent
on current state) and press the ENT Key.
Inhibiting/enabling PDA and FLTA alerting:
1) Select the HTAWS Page.
2) Press the INHIBIT Softkey to inhibit or enable HTAWS (choice dependent
on current state).
Or:
1) Press the MENU Key.
2) Select 'Inhibit HTAWS' or 'Enable HTAWS' (choice dependent on current
state) and press the ENT Key.
Configuring VCO alerting altitudes:
1) Turn the large FMS knob to select the AUX - System Setup Page.
2) If the Aux - System Setup 2 Page is not already displayed, press the SETUP
2 Softkey.
3) Press the FMS Knob to activate the cursor.
4) Turn the large FMS Knob to highlight the altitude shown in the MAX
SELECTED field.
5) Turn the small FMS Knob to select the maximum altitude at which VCO
alerts will be enabled from (from 50 to 500 feet), or select NONE to disable
all VCO alerts.
6) When finished, press the FMS Knob.
72
Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
190-01254-00 Rev. B