Garmin Beil 407GX Cockpit Reference Manual page 84

Hazard Avoidance
Traffic Information Service (TIS)
NOTE: If the G1000H is configured to use a Traffic Advisory System (TAS), TIS
is not available for use.
NOTE: Traffic Information Service (TIS) is only available when the aircraft is
within the service volume of a TIS capable terminal radar site.
Displaying Traffic on the Traffic Map Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Press the OPERATE Softkey to begin displaying traffic. 'OPERATING' is
displayed in the Traffic Mode field.
4) Press the STANDBY Softkey to place the system in the Standby Mode.
'STANDBY' is displayed in the Traffic Mode field.
5) Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
6) Press the TNA MUTE Softkey to mute the "Traffic Not Available" aural
alert.
Displaying Traffic on the Navigation Map
1) Ensure TIS is operating. With the Navigation Map displayed, press the
MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic is now displayed on the map.
Traffic Advisory System (TAS)(Optional)
NOTE: Radar altimeter data is optional for the Traffic Advisory System (TAS).
If radar altimeter data is detected by the TAS at the beginning of a power
cycle and that data is subsequently lost, the TAS will declare a fault and will
not provide traffic information.
Displaying Traffic on the Traffic Map Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
68
Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
190-01254-00 Rev. B