Garmin Beil 407GX Cockpit Reference Manual page 79

6) The 'SEND REQ" button is highlighted and a countdown timer is displayed
in the 'REQUEST STATUS' based on the currently selected update rate.
Press the ENT Key to immediately send an immediate GFDS Data Request.
Or:
Press the FMS Knob to return to the GFDS Weather Data Link Page.
Worldwide Weather Products
Precipitation
NOTE: Precipitation data cannot be displayed at the same time as terrain.
Precipitation data is not real-time. The lapsed time between collection, processing,
and dissemination of radar images can be significant and may not reflect the current
radar synopsis. Due to the inherent delays and the relative age of the data, it should
be used for long-range planning purposes only.
D p
isplaying recipitation
1) Select the MAP Softkey (for the PFD Inset Map, select the INSET Softkey).
This step is not necessary on the GFDS Weather Data Link Page.
2) Select the PRECIP Softkey.
Radar data shown represents lowest level, base reflectivity, of radar returns. The
display of the information is color-coded to indicate the weather severity level. All
weather product legends can be viewed on the GFDS Weather Data Link Page. For
the Precipitation legend, select the LEGEND Softkey when Precipitation is selected
for display.
p l
recipitation imitations
Radar images may have certain limitations:
• Radar base reflectivity does not provide sufficient information to determine cloud
layers or precipitation characteristics (wet hail vs. rain). For example, it is not
possible to distinguish between wet snow, wet hail, and rain.
• Radar base reflectivity is sampled at the minimum antenna elevation angle. An
individual radar site cannot depict high altitude storms at close ranges. It has
no information about storms directly over the site.
• When zoomed in to a range of 30 nm, each square block on the display represents
an area of four square kilometers.
190-01254-00 Rev. B
W i
eather nformation
Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
Hazard Avoidance
63