Flight Planning; Weight Planning; Trip Planning - Garmin Beil 407GX Cockpit Reference Manual

WEIGHT PLANNING

All procedures apply to the MFD unless otherwise stated.
Entering Payload Parameters
Turn the large FMS Knob to select the 'AUX' page group. Turn the small FMS
Knob to select the Weight Planning Page.
1) Press the EMPTY WT Softkey to place the cursor in the Basic Empty Weight
field.
2) Enter the desired aircraft empty weight.
3) Press the ENT Key. The cursor is now over the 'PILOT & STORES' field.
4) Enter the desired weight of Pilot & Stores.
5) Press the ENT Key.
6) Continue repeating these steps until all desired weights have been entered.
Entering Fuel Parameters
1) If necessary, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to place the cursor in the 'FUEL ON BOARD' field.
3) Press the FOB SYNC Softkey to enter the fuel on board quantity as read
from the fuel quantity sensors.
Or:
Manually enter the desired fuel quantity.
4) Press the ENT Key. The cursor is now in the 'FUEL RESERVES' field.
5) Enter the desired reserve fuel quantity.
6) Press the FMS Knob to remove the cursor.

TRIP PLANNING

1) Turn the large FMS Knob to select the 'AUX' page group.
2) Turn the small FMS Knob to select the Trip Planning Page.
3) The current 'PAGE MODE' is displayed at the top of the page: 'AUTOMATIC'
or 'MANUAL'. To change the page mode, press the AUTO or MANUAL
Softkey.
190-01254-00 Rev. B

FLIGHT PLANNING

Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
Flight Planning
35