Garmin Beil 407GX Cockpit Reference Manual page 135

Integrated flight deck for the bell 407gx
Table of Contents

Advertisement

MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message
SLCT FREQ – Select appropriate
frequency for approach.
SLCT NAV – Select NAV on CDI for
approach.
PTK FAIL – Parallel track unavailable:
bad geometry.
PTK FAIL – Parallel track unavailable:
past IAF.
PTK FAIL – Parallel track unavailable:
past IAF.
UNABLE V WPT – Can't reach current
vertical waypoint.
VNV – Unavailable. Excessive track
angle error.
VNV – Unavailable. Unsupported leg
type in flight plan.
VNV – Unavailable. Excessive
crosstrack error.
VNV – Unavailable. Parallel course
selected.
TRAFFIC FAIL – Traffic device has
failed.
NO WGS84 WPT – Non WGS 84
waypoint for navigation -[xxxx]
190-01254-00 Rev. B
Comments
The system notifies the pilot to load the approach
frequency for the appropriate NAV receiver.
Select the correct frequency for the approach.
The system notifies the pilot to set the CDI to the
correct NAV receiver. Set the CDI to the correct
NAV receiver.
Bad parallel track geometry.
IAF waypoint for parallel offset has been passed.
IAF waypoint for parallel offset has been passed.
The current vertical waypoint can not be reached
within the maximum flight path angle and vertical
speed constraints. The system automatically
transitions to the next vertical waypoint.
The current track angle error exceeds the limit,
causing the vertical deviation to go invalid.
The lateral flight plan contains a procedure turn,
vector, or other unsupported leg type prior to the
active vertical waypoint. This prevents vertical
guidance to the active vertical waypoint.
The current crosstrack exceeds the limit, causing
vertical deviation to go invalid.
A parallel course has been selected, causing the
vertical deviation to go invalid.
The system is no longer receiving data from the
traffic system. The traffic device should be serviced.
The position of the selected waypoint [xxxx]
is not calculated based on the WGS84 map
reference datum and may be positioned in error
as displayed. Do not use GPS to navigate to the
selected non-WGS84 waypoint.
Garmin G1000H
Cockpit Reference Guide for the Bell 407GX
Annunciations & Alerts
119

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G1000h

Table of Contents