Dme Tuning (Optional); Selecting A Com Radio; Selecting A Nav Radio; Nav/Com Tuning - Garmin DA42 G1000 Cockpit Reference Manual

Nav/Com/XPDR/Audio Panel

DME TUNING (OPTIONAL)

1) Press the ADF/DME or DME Softkey.
2) Turn the large FMS to select the DME source field.
3) Turn the small FMS Knob to select the desired Nav radio.
4) Press the ENT Key to complete the selection.

SELECTING A COM RADIO

Transmit/Receive
Press the COM1 MIC, COM2 MIC, or COM3 MIC Key (optional COM, if
installed) on the audio panel.
Receive Only
Press the COM1, COM2, or COM3 Key (optional COM, if installed) on the
audio panel.

SELECTING A NAV RADIO

1) Press the CDI Softkey to select NAV1 (VOR1/LOC1) or NAV2 (VOR2/LOC2).
2) Pressing the NAV1 , NAV2 , DME , or ADF Key on the audio panel selects
and deselects the navigation radio audio source. All radio keys can be
selected individually or together.

NAV/COM TUNING

1) Press the small tuning knob to select the desired radio for tuning. A light
blue box highlights the radio frequency to be tuned.
2) Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3) Press the Frequency Transfer Key to place the frequency into the active
frequency field.
10
Garmin G1000 Cockpit Reference Guide for the DA42
190-00406-06 Rev. A