Selecting A Nav Radio; Nav/Com Tuning; Digital Clearance Recorder And Player - Garmin G1000 Reference Manual

nav/Com/xpdr/audio panel
receive only
Press the COM1, COM2, or COM3 Key (optional COM, if installed) on the
audio panel.

seleCting a nav radio

1) To begin navigating using a navigation radio, press the CDI Softkey on the
PFD to select VOR1/LOC1 (NAV1) or VOR2/LOC2 (NAV2).
2) Press the NAV1 , NAV2 , DME , or ADF Key on the audio panel to select or
deselect the navigation radio audio source. All radio keys can be selected
individually or together.

nav/Com tuning

1) Press the small tuning knob to select the desired radio for tuning. A light
blue box highlights the radio frequency to be tuned.
2) Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3) Press the Frequency Transfer Key to place the frequency into the active
frequency field.

digital ClearanCe reCorder and player

NOTE: Only the audio for the selected COM MIC Key is recorded. Audio is
not recorded for COM3 MIC.
• Pressing the PLAY Key once plays the latest recorded memory block, then returns
to normal operation.
• Pressing the MKR/MUTE Key while playing a memory block stops play.
• Pressing the PLAY Key during play begins playing the previously recorded
memory block. Each subsequent press of the PLAY Key begins playing the next
previously recorded block.
10
Garmin G1000 Cockpit Reference Guide for the Cessna Caravan
190-00748-02 Rev. B