Analog Tie Trunk Example; Digital Tie Trunk Example - Avaya CMC1 Installation Manual

Analog Tie Trunk Example

Figure 34: Analog Tie Trunk Wiring
Figure notes
1 External trunk or adapter
1
Before installing the Tie Trunk circuit pack, set the option switches as described in
"Completing Installation and Cable
2
Install cross-connect jumpers to connect the pins from the Tie Trunk circuit pack to the
appropriate leads on the external tie trunk. Names of the tie trunk leads must be determined from
the manufacturer or supplier of the external trunk circuit. The example in
DEFINITY System tie trunk connected to a DEFINITY System tie trunk.
3
Administer on the Trunk Group Screen. See Administrator's Guide for Avaya Communication
Manager.

Digital Tie Trunk Example

Figure 35: Digital Tie Trunk Wiring
Figure notes
1 External trunk
2 DS1 interface circuit pack, position 1C06
3 LO
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
T1 26
1
R1
T11 27
R11 2
E1 28
M1
3
tie_wire RBP 040596
2 Tie trunk circuit pack
Pinouts".
4 LO (Balanced output pair)
5 L I
L I (Balanced input pair)
6
Installing and Cabling the Cabinets
Install and Wire Telephones and Trunks
29 T2
4 R2
30 T12
5 R12
E2
31
6 M2
Chapter 2,
Figure 34 shows a
77