1151B1 And 1151B2 Power Supplies - Avaya CMC1 Installation Manual

1151B1 and 1151B2 Power Supplies

The 1151B1 and 1151B2 power supplies are a local power supply. The telephones or consoles connect
directly to them through an RJ45 connector. The 1151B2 has a battery backup.
These power supplies comply with the Underwriters Laboratories Inc. (UL) Standard UL 60950 third
edition.
Table 18: 1151B1 and 1151B2 Power Supply UL 60950 Compliance
Complies
Certified
Approved
Approved
For safety instructions, see
page 99. For installation instructions, see
Important Safety Instructions for 1151B1 and
1151B2 Power Supplies
Please read the following helpful tips. Retain these tips for later use.
When using this power supply, the following safety precautions should always be followed to reduce the
risk of fire, electric shock, and injury to persons.
•
Read and understand all instructions.
•
Follow all warnings and instructions marked on this power supply.
•
This product can be hazardous if immersed in water. To avoid the possibility of electrical shock,
do not use it near water.
•
To reduce the risk of electric shock, do not disassemble this product except to replace the battery.
•
This product should be operated only from the type of AC power source indicated on the label. If
you are not sure of the type of AC power being provided, contact a qualified service person.
•
Do not allow anything to rest on the power cord. Do not locate this product where the cord will be
abused by persons walking on it.
•
Do not overload wall outlets and extension cords as this can result in the risk of line or electric
shock.
•
Disconnect the cords on this product and refer servicing to qualified service personnel under the
following conditions:
•
When the power supply cord or plug is damaged or frayed.
•
If liquid has been spilled into the product.
•
If the product has been exposed to rain or water.
•
If the product was dropped or the housing has been damaged.
•
If the product exhibits a distinct change in performance.
•
If the product does not operate normally by following the operating instructions.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
UL 60950
CSA 22.2
EN6950
CE
Important Safety Instructions for 1151B1 and 1151B2 Power Supplies
Connect the 1151B1 or 1151B2 Power Supplies
Installing and Cabling the Cabinets
Install and Wire Telephone Power Supplies
on
on page 100.
99