Add Speech Synthesis; Add Code Calling Access; Add Pooled Modem - Avaya CMC1 Installation Manual

Installation, upgrades and additions for media gateways
Table of Contents

Advertisement

Add Speech Synthesis

The Speech Synthesizer circuit pack is required when the Voice Message Retrieval, Automatic Wakeup,
or Do Not Disturb features are activated. The circuit pack does not require administration.
1
Determine the port assignment of the Speech Synthesizer circuit pack being added.
2
Install the Speech Synthesizer circuit pack in the designated carrier slot.

Add Code Calling Access

The tones for the Code Calling feature are generated by the Tone-Clock circuit packs in the port
networks.
1
Install an Auxiliary Trunk circuit pack or a Speech Synthesizer circuit pack and connect for
Loudspeaker Paging. The Code Calling Access feature shares the same ports as Loudspeaker
Paging. An Auxiliary Trunk circuit pack provides 4 ports for Loudspeaker Paging and Code
Calling Access.
2
Administer the form listed under "Code Calling Access" in Administrator's Guide for Avaya
Communication Manager.

Add Pooled Modem

Modem pooling supports two types of conversion resources: integrated and combined.
An integrated conversion requires a Pooled Modem circuit pack for each 2 conversion resources
provided.
A combined conversion requires a port of a TN745B or TN2136 Digital Line circuit pack and a port of
either an 8-port TN742, TN769, a 16-port TN746B, or a 24-port TN793/B, TN2793/B Analog Line
circuit pack for each conversion resource provided.
The pooled modem requires a WP90110 L7 power supply. Although integrated conversion can use either
the L5 or L7, the combined only works with an L7.
CAUTION:
The L5 and L7 power supplies look identical. Check the label to be sure you have the L7
before installing.
Determine the port assignment of the circuit packs to be added (if required).
3
Install the appropriate circuit packs in assigned carrier slot (if required).
4
For Paradyne 3800 series modems:
a
Type AT&F&D2&S4\D3S2=128x7V2S7=60S85=1 and press Enter.
b
Type ATY0S10=100S78=2M0E0\N1&W and press Enter.
5
For other types of modems, refer to the vendor's documentation.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
Adding or Removing Hardware
Add Speech Synthesis
217

Advertisement

Table of Contents
loading

Table of Contents