Install Terminal Server; Installing And Administering The Terminal Server - Avaya CMC1 Installation Manual

Adding or Removing Hardware

Install terminal server

Install terminal server
This chapter provides information on connecting adjunct equipment using a terminal server
Avaya supports the IOLAN+ 104 terminal server.
Any device that does not support a direct TCP/IP connection, but that does support an RS232 interface,
can connect through a terminal server. System printers and some CDR devices use RS232 connections
and can connect through a terminal server.
You can connect up to four adjuncts through one terminal server.
Figure 102: Switch-to-adjunct LAN connectivity through a terminal server
cydfadj KLC 091302
Figure notes
1 switch
2 C-LAN circuit pack
3 10/100Base-T Hub (optional)
Installing and administering the terminal
server
Make sure you have all the equipment on site before the installation. You must have the hardware listed
in Table 65.
Table 65: Required equipment
Comcode
700015084
NA
NA
NA
405369042
278
1
3
LAN
2
Description
IOLAN+ 104 communications server
RJ45-to-DB25 connector for IOLAN+
(supplied with 700015084)
DB25-to-DB9 connector for PC COM port
RS232 Null modem (if needed for PC or
printer connectivity)
Male/female adapter (if necessary)
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
4
DATA CONNECTIONS ONLY - NOT FOR TELECOM USE
1 2 3 4 10BASE-T 5VDC
4 terminal server
5 serial port
6 CDR adjunct
Qty
1
4
1
1 or more
1 or more
(Figure 102).
6
5
Supplier
Avaya
Avaya
Avaya
Avaya
Avaya
1 of 2
June 2004