Upgrading Tn802 Ip Trunking To Tn2302Ap Ip Media Processor - Avaya CMC1 Installation Manual

Adding or Removing Hardware
Add IP Solutions
— Set the
— Set the
7
Press Enter to save the information and effect the new settings.
Refer to the Administration for Network Connectivity for Avaya Communication Manager for more
information on these administration steps and for the steps to administer IP Softphones and H.323 trunks.
NOTE:
The administration of the TN2302AP is the same as that for the TN802B.
Test the External Connection to the LAN
To test the external IP connections, ping the C-LAN or IP Media Processor server and ping a known
computer connected to your network. If everything is configured correctly, the
Ping Results screen reads pass. If it reads abort, verify the IP-address information and check the
connectivity, including the cabling.
1
Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and press Enter. The variable
nnn.nnn.nnn.nnn is the IP address of the TN2302AP IP Media Processor and UUCSS is the
cabinet, carrier, and slot of the TN2302AP IP Media Processor.
ping ip-address 192.168.10.21
2
Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and press Enter. The variable
nnn.nnn.nnn.nnn is the IP address of the customer's gateway and UUCSS is the cabinet, carrier,
and slot of the TN2302AP IP Media Processor.
3
Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and press Enter. The variable
nnn.nnn.nnn.nnn is the IP address of another computer beyond the gateway and UUCSS is the
cabinet, carrier, and slot of the TN2302AP IP Media Processor.
The TN2302AP IP Media Processor is now installed in the carrier and connected to the IP network.
Upgrading TN802 IP Trunking to TN2302AP IP
Media Processor
To upgrade IP Trunking to IP Media Processor, you must replace
•
The TN802 circuit pack with a TN2302AP circuit pack.
•
The TN799 circuit pack with a TN799B/C circuit pack.
•
The H600 512, G1 external cable assembly with an IP Media Processor adapter.
242
field to 1 unless you are given a different number.
Net Region
field to y
Enable Eth Pt
End-pt IP Port
192.168.10.21 01A13
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
PING RESULTS
Port Type Result
MEDPRO PASS
column on the
Result
Time(ms) Error Code
10 1124
June 2004