Local Administrative Options
Accessing Local (Craft) Procedures
Note:
Local procedures can only be invoked when the local (dialpad) procedure status
Note:
system value (PROCSTAT) is "0", giving full access to local procedures.
Note:
The factory-set default Craft Access Code is 27238.
Note:
During Telephone Startup:
1. During startup, invoke local procedures by pressing Program to display the Craft Access
Command Entry screen:
Startup interrupted
Enter command
2. Press Mute and enter the local dialpad procedure password (0 to 7 numeric digits), as
specified by the system administrator in the system value PROCPSWD. For security
purposes, the telephone displays an asterisk for each numeric dialpad press.
3. Press Enter when password entry is complete.
The entry is compared to the PROCPSWD value. If they match, the telephone displays the
Admin Procedures screen, with the prompt "Select procedure and press Start."
4. Use the navigation arrows to scroll to and highlight the local procedure you want, then press
Select or OK. Or scroll to the procedure you want and press the corresponding line button.
During Normal Telephone Operation:
1. Invoke all local procedures by pressing the Mute button, entering the local (dialpad)
procedure password (0 to 7 numeric digits), then pressing the # button.
A 6-second timeout is in effect between button presses after pressing the Mute button. If
you do not press a valid button within 6 seconds of pressing the previous button, the
collected digits are discarded. In this case, no administrative option is invoked.
The entry is compared to the PROCPSWD value. If they match, the telephone displays the
Admin Procedures screen, and prompts "Select procedure and press Start."
2. Use the navigation arrows to scroll to and highlight the local procedure you want, then press
Select or OK. Or scroll to the procedure you want and press the corresponding line button.
26 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide