Pre-Installation Checklist For Static Addressing; Static Addressing Installation - Avaya one-X Installation And Maintenance Manual

Pre-Installation Checklist for Static Addressing

Before performing static programming of address information, verify that all the requirements
listed in the Verify These Network Requirements
met. You do not have to consider item 4 on page 12, as it refers to the DHCP server. In addition,
you must have the values for the following parameters. Failure to do so can cause data entry
errors that prevent the telephone from working. Such errors can also have a negative impact on
your network. Print copies of this checklist for each subnet.
1. The IP Address of the telephone.
2. The IP Address of the router.
3. The IP subnet mask.
4. The IP Address of the HTTP and/or /HTTPS server.
5. The IP Address of the DNS server.
6. The VLAN ID (the L2QVLAN value).
7. The VLANTEST value.

Static Addressing Installation

The usual way to assign IP Addresses to IP telephones is the automatic method described in
Dynamic Addressing Process
assignment of IP Addresses is desired.
!
CAUTION:
Static addressing is necessary when a DHCP server is unavailable.
CAUTION:
Because of the increased opportunities for text entry errors associated with static
addressing, Avaya strongly recommends that a DHCP server be installed and
static addressing avoided.
Pre-Installation Checklist for Static Addressing
section of the
on page 19. There might be times, however, when manual
Pre-Installation Checklist
Issue 1 May 2007
are
29