Converting Software On 9600 Series Ip Telephones - Avaya one-X Installation And Maintenance Manual

9600 Series SIP IP Telephone Installation
14. Verify that the 9600 Series IP Telephone package includes the following components:
●
●
●
●
●
●
●
15. IP telephones ship from the factory with H.323 software. Existing installations might
also have many IP telephones running H.323 software. For instructions on how to
convert between H.323 and SIP software, see
Telephones.
Note:
For sites using headsets, the 9600 Series SIP IP Telephones support only the
Note:
HIS headset cords.

Converting Software on 9600 Series IP Telephones

9600 Series IP Telephones use either H.323 or SIP software but come from the factory with
H.323 software loaded by default. After telephone connection, you should ensure that those
telephones that will run under a SIP protocol are set up properly. This section describes how to
determine what your telephone "environment" is and then convert applicable telephones from
H.323 to SIP software, or from SIP to H.323 software.
There are several H.323 to SIP or SIP to H.323 conversion scenarios, and each scenario
depends on whether the majority of your telephones are H.323 or SIP:
H.323-Centric - an environment where the majority of IP telephones are and will remain
●
running H.323 software, but some telephones will become SIP IP telephones. In an
H.323-centric environment, the 96xxH323... software bundle must reside on the HTTP
server and Communication Manager must be configured with the appropriate H.323
parameters. To convert an individual telephone from H.323 to SIP, both the SIP
Enablement Services (SES) server and Avaya Communication Manager (CM) must be
configured with the appropriate SIP parameters. Any telephone in use prior to conversion
must run Release S1.2 or greater software with a SIG parameter value of "default"
(H.323). See
instructions.
12 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide
1 telephone set with pre-attached stand.
1 handset capable of transmitting and receiving 7KHz audio.
1 H4DU 9-foot long (when extended) 4-conductor coiled handset cord, plugged
into the telephone and the handset.
1 Category 5e modular line cord for the connection from the IP telephone to the
Ethernet wall jack.
Avaya one-X™ Deskphone Edition for 9600 Series IP Telephones Safety
Instructions.
Avaya one-X™ Deskphone Edition for 9600 Series IP Telephones Stand
Instructions.
Avaya one-X™ Deskphone Edition for 9600 Series IP Telephones Wall Mount
Instructions.
Table 1, the H.323 to SIP and SIP to H.323 Conversion Chart
Converting Software on 9600 Series IP
for conversion