Converting 9600 Series Ip Telephones - Avaya one-X Installation And Maintenance Manual

SIP-Centric - an environment where the majority of IP telephones are or will become SIP
●
telephones running SIP software. In a SIP-centric environment, the 96xxSIP... software
bundle must reside on the HTTP server and both SES and CM must be configured with the
appropriate SIP parameters. To convert an individual telephone from SIP to H.323, Avaya
Communication Manager (CM) must be configured with the appropriate H.323
parameters. Any SIP telephone in use prior to conversion must run Release SIP 1.0 or
greater software with a SIG parameter value of "default" (SIP). See
SIP and SIP to H.323 Conversion Chart
What makes an environment H.323- or SIP-centric depends on the type of upgrade script files
the environment is running (H.323 or SIP) and the Signaling Protocol Identifier (SIG) parameter
setting. The SIG parameter has three possible values:
Default - either H.323 or SIP, set automatically for all telephones depending on whether
●
your environment is H.323-centric or SIP-centric.
H.323 - manually set to H.323 for a specific telephone by an installer or administrator
●
according to the procedures in this section.
SIP - manually set to SIP for a specific telephone by an installer or administrator according
●
to the procedures in this section.

Converting 9600 Series IP Telephones

An H.323 IP telephone can be either in use with possible customized settings or out of the box
with factory default settings. An out of the box telephone requires accessing the SIG Craft
procedures early in the power up and initialization process and setting the Signaling Protocol
Identifier (SIG) parameter for that telephone to "SIP." Converting to SIP early avoids having to
first load H.323 software, log in, and then invoke the "in use" process to load the SIP software.
Note:
For information about the SIG parameter, see "Choosing the Right Application
Note:
File and Upgrade Script File" in the Avaya one-X™ Deskphone Edition for 9600
Series SIP IP Telephones Administrator Guide. For information on setting or
changing the SIG parameter, see
Converting Software on 9600 Series IP Telephones
for conversion instructions.
Signaling Protocol Identifier
Table 1, the H.323 to
on page 37.
Issue 1 May 2007 13