Reset System Values; Restart The Telephone - Avaya one-X Installation And Maintenance Manual

Local Administrative Options

Reset System Values

Use the following procedure to reset all system initialization values to the application software
default values.
!
CAUTION:
This procedure erases all static information, without any possibility of recovering
CAUTION:
the data.
1. When you select RESET VALUES from the Admin Procedures Screen, the telephone
displays a confirmation screen asking if you are sure you want to reset the telephone.
2. Press No to return to the Admin Procedures screen without resetting the telephone. Press
Yes to start the telephone reset.
The telephone resets from the beginning of registration, which might take a few minutes. A
reset:
Resets all system values and system initialization values except AUTH and AUTH_ONLY
●
to default values.
Resets call server values to their defaults.
●
Deletes any entries in the Redial buffer.
●
Does not affect user-specified data and settings like Contacts data or the telephone login
●
and password. To remove this type of data, see the

Restart the Telephone

Use the following procedure to restart the telephone.
1. When you select RESTART PHONE from the Admin Procedures Screen, the telephone
displays a confirmation screen asking if you are sure you want to restart the telephone.
2. Press No to return to the Admin Procedures screen without restarting the telephone. Press
Yes to proceed with the registration steps covered in the
page 19.
A restart does not affect user-specified data and settings like Contacts data or the telephone
login and password.
The remainder of the restart procedure depends on the status of the boot and application
files. For information, see
36 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide
Appendix A: Restart Scenarios.
Clear Procedure on page 31.
Dynamic Addressing Process on