Avaya one-X Installation And Maintenance Manual page 58

Restart Scenarios
3. The software determines whether sufficient IP Address information was downloaded. In this
scenario, it is discovered that sufficient information has not been downloaded. The
following message displays while the DHCP process is invoked:
DHCP: 0 secs
* to program
The number of elapsed seconds is incremented once per second, until DHCP successfully
completes.
4. While the IP telephone establishes a TCP connection to the HTTP server, the telephone
displays the following message:
HTTP:n ipadd
where n is the number of the IP Address obtained from the HTTP server and ipadd is the IP
Address.
5. The following message displays while the HTTP process is invoked:
HTTP: n uri
The number increments once per second, until the HTTP server responds.
6. While the upgrade script file is being downloaded from the HTTP server, all IP telephones
display the following message:
HTTP:n sc etag
where n is the number of the IP Address obtained from the HTTP server, sc is the status
code of the HTTP response and etag is the value of the ETag header.
7. The script file is processed. The software determines that the name of the boot code file in
the telephone (BOOTNAME) is not the latest version. APPNAME is set to the name of an
application file to replace the boot code. The following message displays while the
application file is downloaded into RAM:
app_filename
n KB received
where n is the number of KBs downloaded.
58 9600 Series SIP IP Telephones Release 1.0 Installation and Maintenance Guide