Heater Specifications - Cannon CANTIB User Instructions

Heater Specifications

Do not use fire with broken or missing logs.
Gas type:
Gas consumption:
Energy star rating:
Energy output:
Heater type:
Operating pressure:
Gas regulator:
Min. inlet pressure:
Fan:
Controller:
Minimum cavity
dimensions
Power requirement:
Optional Accessories:
Overall dimensions:
8
Natural or Propane gas, as indicated
on data label
26 MJ/hr input
3.77
20.7 MJ/hr
Heater approved to AG 103.
Natural gas: 1.0 kPa
Propane gas: 2.65 kPa
Integral with controller (NG)
1.13 kPa (NG)
Propane gas: Regulated to supply 2.70
kPa to appliance
Three speed
Electronic
Height: 605mm dimensions*
Width: 695mm
Depth: 385mm
240 VAC 10 A
• Safety guard
• Gold trim
• Mock fireplace installation kit*
Refer fig. 8
*For installation into a non-combustible fireplace,
ie: masonry or brick or into a mock fireplace, i.e.
timber or plasterboard.
Note: when installing into a mock fireplace a
mock fireplace heater must be used.
Model no's: CANTIBM & CANTIBMLP.
9