Inbuilt: Fitzroy Specifications - Cannon Canterbury CANTIB-SDEEB Instruction Manual

inbuilt: fitzroy sPeCifiCations

808 mm
fig 3 front View and side View
8 | Cannon Fitzroy / Canterbury Inbuilt
Cannon fitzroy inbuilt
385 mm
50 mm 229 mm
gas type
gas consumption
Energy output
Energy star rating
Heater type
Operating pressure
gas regulator
Min. inlet pressure
Fan
Ignition
Power requirement
Power consumption
Minimum cavity
dimensions
Optional accessories
Overall dimensions
*Minimum depth for heater and flue adaptor.
Please Note:
• When installing into a mock fireplace a mock fireplace
installation kit must be used.
• The data label is located in the fan chamber.
Access by removing front fascia.
41 mm
Natural or Propane gas,
as indicated on data label
26.0 MJ/hr
5.98 kW / 21.45 MJ/hr
4.05 stars
gas space heater approved to
AS 4553:2008
Natural gas 0.75 kPa (high)
/0.40 kPa (low)
Propane gas 2.65 kPa (high)
/ 1.1 kPa (low)
Integral part of controller
1.13 kPa (Ng)
2.75 kPa (Propane)
3 speed
Electronic direct spark
240 vAC 10 Amp
switch socket
90 vA maximum
Height 605 mm*
Width 700 mm*
Depth 410 mm*
• Glass front
• Remote thermostat
• Spacer kit
• 3 sided surround
• 4 sided surround
• Console kit
• Freestanding kit
• Inbuilt flue kit
• Mock fireplace installation kit
refer to FIG 3