Heater Specifications - Cannon Fitzroy Inbuilt Installation Instructions Manual

Heater specifications

Gas type: Natural or Propane gas, as indicated on data label
Gas consumption: 26.0 MJ/hr
Energy output: 5.98 kW
Enery star rating: 4.05 stars
Heater type: Gas space heater
approved to AS 4553:2008
Operating pressure: Natural gas: 0.75 kPa
(at burner high setting) Propane gas: 2.65kPa
Gas regulator: Integral part of controller
Min. inlet pressure: 1.13 kPa (NG)
2.75 kPa (Propane)
Fan: 3 speed
Controller: Electronic direct spark
Power requirement: 240 VAC 10 A
Power consumption: 90 VA maximum
Minimum cavity Height: 605mm*
dimensions: Width: 700mm
Depth: 393mm
Optional accessories: Glass front
Remote thermostat
Spacer kit
3 sided surround
4 sided surround
Console kit
Overall dimensions: Refer to fig. 1
4
*
Note: when installing into a mock fireplace a mock fireplace
installation kit must be used.
Note:
The data label is located within the fan
chamber (bottom heater cavity). Access by
removing fascia.
1
WIRING DIAGRAM
25