Selecting A Destination With An Address Search - Oce cm6520 User Manual

Sending a user box document

Selecting a destination with an Address search

If LDAP server settings are specified in Administrator mode, [Address Search] appears in the screen.
!
Detail
For details on the LDAP server settings, refer to "Enabling LDAP" in the User's Guide [Network Scanner
Operations].
If "Manual Destination Input" (displayed by touching [Security Settings] on the Administrator Settings
screen, then [Security Details]) is set to "Restrict", [Address Search] does not appear.
The position of [Address Search] can be changed from the User Settings screen. For details, refer to
"Address Book Default" in the User's Guide [Network Scanner Operations].
1
Touch [Address Search].
2
If multiple LDAP servers are specified, select the server to be searched, and then touch [ON].
3
Select the desired search type.
– When there is only one LDAP server
cm6520
5
5-15