To Search The Destination - Oce cm3521 User Manual

Scanning documents

To search the destination

1
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to "Specifying the scan set-
tings" on page 2-43.
2
After specifying the settings, touch [OK].
3
Load the document into the ADF (optional) or position it on the original
glass of the machine.
4
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
cm3521
2
2-15