Selecting A Destination With An Ldap Search - Oce cm6520 User Manual

Using fax/scanning functions

Selecting a destination with an LDAP search

Follow the procedure described below to search for an E-mail address
registered with the LDAP server and select the destination.
!
Detail
In order to perform an LDAP search, LDAP must be enabled and an LDAP server
must be registered. For details on specifying LDAP settings, refer to the User's
Guide [Network Scanner Operations].
If "Manual Destination Input" in Administrator mode is set to "Restrict", the LDAP
search feature is not available. For details on specifying the setting for the
"Manual Destination Input" parameter, refer to the User's Guide [Network
Scanner Operations].
1
Touch the Address Search tab.
– If multiple LDAP servers are specified, select the server to be searched,
and then touch [OK].
cm6520
3
3-9