Original Settings - Oce cm6520 User Manual

Saving documents
– Touching [Photo Size] displays the Photo Size screen. Select the orientation and size of the photo
to be scanned, and then touch [OK].
5
Touch [OK], and then touch [OK] in the next two screens that appear.

Original Settings

Specify the type of document that is loaded, for example, if it contains mixed page sizes or is folded in a
zigzag.
Parameter
Mixed Original
Z-Folded Original
Long Original
Original Direction
Binding Position
Despeckle
Note
These functions can be used together.
cm6520
Description
Select this setting when documents of different sizes are loaded into the ADF (op-
tional). The scan speed is decreased since the size of each page is detected before
it is scanned.
Select this setting to detect the size of a zigzag-folded document by the length fed
through the ADF.
Select this setting for documents that are longer than the standard size.
Select the orientation of the document. After the document is scanned, the data is
processed so that it is correctly oriented.
Select the binding position, such as when holes are punched in the document or the
document is stapled.
This adjusts the scan of double-sided documents so that the binding position is not
reversed.
Left Select this setting for a document with binding on the left side.
Top Select this setting for a document with binding at the top.
Auto: The binding is on the long side if the page is 297 mm or less, or it is on the short
side if the page is more than 297 mm.
Select this setting to reduce the effect that dust on the left partition glass has on im-
ages when the document is loaded into the ADF.
2
2-39