7
5
Type the password specified in step 4, and then touch [OK].
The message "Turn the main switch OFF and ON." appears.
6
Follow the instructions in the screen to restart the machine.
–
To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.
–
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the
Utility mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or User Box
mode appears.
The hard disk locking password is set.
Reminder
Be sure to keep the specified password in a safe place so that it will not be lost.
HDD Encryption Setting
If the security kit is installed, the machine can be set to encrypt the hard disk.
!
Detail
[HDD Encryption Setting] appears when security kit SC-503 is installed.
If the encryption key is specified or changed, data saved on the hard disk may no longer be available.
1
Touch [Security Settings] in the Administrator Settings screen.
2
Touch [6 HDD Setting] in the Security Setting screen.
3
Touch [HDD Encryption Setting] in the HDD Setting screen.
A message appears, requesting confirmation to specify the setting.
7-32
Specifying Utility mode parameters
cm6520