Selecting A Destination With An Ldap Search - Oce cm4521 User Manual

Using fax/scanning functions
2
Select the desired destination.
– The last five destinations where a transmission
was sent are displayed.
– To cancel a selection, touch the button for a
selected destination again.

Selecting a destination with an LDAP search

Follow the procedure described below to search for an
E-mail address registered with the LDAP server and
select the destination.
!
Detail
In order to perform an LDAP search, LDAP must be
enabled and an LDAP server must be registered. For
details on specifying LDAP settings, refer to the User's
Guide [Network Scanner Operations].
cm4521
3
3-11