7
4
Select the desired method for overwriting data on the hard disk, and then touch [Overwrite].
A confirmation message appears, asking whether or not to overwrite the data.
5
To overwrite the data, touch [Yes], and then touch [OK].
–
To return to the Overwrite All Data screen without overwriting the data, touch [No].
6
Follow the instructions in the screen to restart the machine.
–
To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.
–
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the
Utility mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or User Box
mode appears.
All data on the hard disk is overwritten.
7-30
Specifying Utility mode parameters
cm6520