User Access-Control Mac-Based; User Access-Control Port-Based - TP-Link TL-SG2216 Reference Manual

Global Configuration Mode
Example
Enable the access-control of the user whose IP address is 192.168.0.148:
TL-SG2424(config)#
255.255.255.255

user access-control mac-based

Description
The user access-control mac-based command is used to limit the MAC
address of the users for login. Only the user with this MAC address you set here
is allowed to login. To cancel the user access limit, please use no user
access-control command.
Syntax
user access-control mac-based mac-addr
no user access-control
Parameter
mac-addr —— The source MAC address. Only the user with this MAC address
is allowed to login.
Command Mode
Global Configuration Mode
Example
Configure that only the user whose MAC address is 00:00:13:0A:00:01 is
allowed to login:
TL-SG2424(config)# user access-control mac-based 00:00:13:0A:00:01

user access-control port-based

Description
The user access-control port-based command is used to limit the ports for
login. Only the users connected to these ports you set here are allowed to login.
To cancel the user access limit, please use no user access-control command.
Syntax
user access-control
40
ip-based 192.168.0.148