Power Saving Setting - Fujitsu fi-5900C Operator's Manual
Image scanner
Hide thumbs
Also See for fi-5900C:
- Operator's manual (239 pages) ,
- Getting started (30 pages) ,
- Consumable replacement and cleaning instructions (24 pages)
Table of Contents
Advertisement
8.2 Power saving setting
When not using this scanner for a certain time, it will enter automatically the power saving mode.
Configure the Power saving mode as follows:
1.
Start up the Software Operation Panel.
Refer to
"8.1 Scanner Settings" on page 177
2.
Select [Device Setting] from left side list in the window.
3.
Use the slide control bar to set the waiting time before entering the power
saving mode.
Setting range 15 - 55 minutes. (Set in steps of 5 minutes)
.
8.2 Power saving setting
8
185
Hide quick links:
Advertisement
Table of Contents
