Indications On The Function Number Display - Fujitsu fi-5900C Operator's Manual

HINT

■ Indications on the Function Number Display

The following shows the indications on the Function Number Display.
No.
Lights only one time upon turning on the scanner.
Indicates that the scanner has been turned ON and is being initialized.
Indicates that initialization has been completed successfully.
This status is called "Ready Status".
Indicates that a temporary error (that users can solve) has occurred during the initialization or
scanning of documents.
"J" or "U" and an error number (1, 2, 4, 6, 8, 0) are displayed alternately.
To return the scanner to the ready status ("1"), press the "Scan" or "Send to" button while the error
or
is indicated.
Indicates that a device alarm (that users can not solve) has occurred during the initialization or
scanning of documents.
"E" and an alarm number (2 to 9, and A, c, d, F) are indicated alternately.
To return the scanner to the ready status ("1"), press "Scan" or "Send to" button.
If this alarm occurs, turn the power off and then on again. If the alarm is indicated after turning on
the power again, contact your service engineer.
6
1.2 Operator panel
Operator Panel Overlays sheets in French, German, Italian, Spanish and
Chinese (Sipmlified) are provided with the scanner. To change the overlay,
open the plastic cover of the Operator Panel.
Descriptions