Intelligent Multifeed Function - Fujitsu fi-5900C Operator's Manual

■ Intelligent Multifeed Function

There are three modes; select one according to your needs.
Select a mode by using the Software Operation Panel. For how to select a mode, see section 2.
Item in Method to bypass Multifeed
Software
Operation
Panel
Manual mode When a Multifeed error occurs, press [Send to] to
(Bypass by front eject sheet in the scanner's transport path. Examine
panel button) the last sheet scanned.
If no paper is glued on the ejected sheet, return the
sheet to the Hopper and press the [Scan] button.
If glued paper is present on the ejected sheet, return
the sheet to the Hopper, press the [Function] button
once (Slow Blink rate of the function number display
will change to Fast Blink rate) and press the [Scan]
button. The scanner will not check for a Multifeed
error on the first sheet being scanned.
The following sheets are checked for Multifeed
errors with the already-existing Multifeed settings in
the Software Operation Panel or driver. (Default)
Automode 1 When a Multifeed error occurs, press [Send to] to
(Bypass by com- eject sheet in the scanner's transport path. Examine
bination of length the last sheet scanned.
and position) If no paper is glued on the ejected sheet, return the
sheet to the Hopper and press the [Scan] button.
If glued paper is present on the ejected sheet, return
the sheet to the Hopper, press the [Function] button
once (Slow Blink rate of the function number display
will change to Fast Blink rate) and press the [Scan]
button. The scanner will record the length and posi-
tion of the glued paper that caused the error.
The following sheets are checked for Multifeed
errors and then the scanner bypasses Multifeed, if
the scanned overlap pattern is same as already
recorded pattern(s).
Automode 2 When a Multifeed error occurs, press [Send to] to
(Bypass by eject paper in the scanner's transport path. Examine
length) the last sheet scanned.
If no paper is glued on the ejected sheet, return the
sheet to the Hopper and press the [Scan] button.
If glued paper is present on the ejected sheet, return
the sheet to the Hopper, press the [Function] button
once (Slow Blink rate of the function number display
will change to Fast Blink rate) and press the [Scan]
button. The scanner will record the length of the
glued paper that caused the error.
The following sheets are checked for Multifeed
errors and then the scanner bypasses Multifeed, if
the scanned overlap pattern is the same or shorter
than the already recorded pattern.
100
3.12 Not detecting Multifeed for fixed format
Applicable case
Use this mode when you Pages scanned before
want to continue scan- errors are sent to memory.
ning, while checking for Extraneous images may
glued paper every time a be generated during a
multifeed error is Multifeed error.
detected.
Use this mode when you Pages scanned before
scan many sheets in a errors are sent to memory.
fixed format; for exam- Extraneous images may
ple, when every sheet has be generated during a
the same size glued paper Multifeed error.
at the same location.
Use this mode when you Pages scanned before
scan multiple sheets, errors are sent to memory.
each having different- Extraneous images may
size glued paper at a dif- be generated during a
ferent location. Multifeed error.
Comments