Scanning Documents With Different Widths - Fujitsu fi-5900C Operator's Manual

3.3 Scanning Documents with different
widths
When you scan a batch of documents with different widths, follow the instruction below.
1.
Align the leading edge of the documents.
Aligning the document
alongside their center line
This section describes the procedure to align the document alongside their center line.
For the procedure to align the document with its left (or right) edge, refer to
document by either Side Guide of the hopper." on page 19
2. Load the documents on the center of the hopper.
Aligning the document
with its left (or right) edge
.

3.3 Scanning Documents with different widths

" (2)Setting the
Pick roller
71
3